Abradable coatings Coatings which are designed to be abraded by a mating surface to form a tight gas or air seal, while retaining good erosion resistance.
Abrasive blasting A process for cleaning and roughening a surface by means of an abrasive directed at high velocity against the work piece.
Abrasive Wear Wear due to hard particles or hard protuberances forced against and moving along a solid surface.
Acetylene C 2 H 2 (ethyne) Unsaturated aliphatic hydrocarbon gas. Used as a fuel gas in combustion thermal spray processes, welding and cutting. Acetylene has the highest flame temperature and requires the smallest amount amount of oxygen to form a neutral flame.
Acoustic emission Acoustic emissions are sound or ultrasound pulses generated during crack initiation or propagation in materials and coatings as a result of being subjected to stress. Acoustic emissions can be detected by transducers.
Adhesive Wear Wear due to localized bonding between contacting solid surfaces leading to material transfer between the two surfaces or the loss from either surface.
Agglomerate Several particles adhering together.
Agglomerated powder A powder made up of agglomerates
Air classification The separation of powder into particle size fractions by means of an air stream of controlled velocity.
Aluminising (gas) High temperature (approx. 900 o C) pack or gaseous diffusion of aluminium into the surface of a component to enhance high temperature corrosion and oxidation resistance.
Alkyd resin A type of polyester resin used in paints and other surface coatings. The original alkyd resins were made by co-polimerising phathalic anhydride with glycerol, to give a brittle cross. Linked polymer. Aluminising (hot dip) An aluminium coating process based on submersion in liquid metal, usually with a strip steel product being continuously fed through the bath. Provide galvanic corrosion protection.
Aluminising (Thermal Spray Method) Thermal sprayed coatings of aluminium usually on substrates of steel or nickel chromium alloys which are subsequently heat treated to aluminise the surface.
Aluminium Ion Plating The deposition of aluminium by a vacuum evaporative process. Provides galvanic corrosion resistance. Normally given a passivation treatment.
Amorphous noncrystalline, or devoid of regular structure.
Anion A negatively charged ion
Anode Positively charged electrode (nozzle in plasma gun) - the electrode of an electrolytic cell at which oxidation is the principle reaction. (Electrons flow away from the anode in the external circuit. Its usually the anode where corrosion occurs and metal ions enter solution.)
Anodic coating A coating that becomes the anode in an electrochemical cell with the substrate (cathode). The only metals in common use for thermal spraying which are anodic to iron and steel are zinc and aluminium.
Anodising The production of an oxide layer on aluminium alloys. The process is electrolytic, a typical electrolyte being sulphuric acid. Treatment at room temperature produces thin, decorative layers with some corrosion protection. Treatment at 0 o C produces hard, thicker layers (up to 100Ã‚Âµ) with wear resistance. They can be post sealed to give improved corrosion resistance.
Apparent density The weight of a unit volume of powder or coating
Apparent hardness The value obtained by testing a coating or sintered material with standard indentation hardness equipment. (See macrohardness) Since the reading reflects a composite of pores and solid material, (which may be particles relatively poorly bonded together) it is usually lower than that of an equivalent solid wrought or cast material. Not to be confused with particle hardness (See microhardness).
Arc Wire Spraying A thermal spray process where two electrically conducting wires are brought together to form an electric arc. Molten material formed in the arc is projected by a compressed gas stream towards the work piece to form a coating.
Argon (Ar) Monatomic noble gas, atomic number 18, one of the most inert elements. Commonly used as a plasma gas for plasma spraying and providing inert environments for many processes.
Atomisation The dispersion of a molten material into particles by a rapidly moving gas or liquid stream or by mechanical dispersion.
Atomised powder A powder produced by the dispersion of a molten material into particles by a rapidly moving gas or liquid stream or by mechanical dispersion.
Autoclaving The production of a stable, protective oxide on steel parts by treatment in a pressurised, high temperature steam containing atmosphere. Back to top
Binder A cementing medium used in producing composite or agglomerate powders.
Blasting A pressurised stream of particlulates (ceramic, plastic, metal, , etc.) applied on a surface to clean, peen or abrade.
Blended Powder A powder consisting of two or more different powder materials thoroughly mixed.
Bond This represents the state of adhesion between the coating and the substrate. It's strength will depend on the details of the spraying process and the materials used. Bonding mechanisms may be mechanical, physical, chemical or metallurgical or a combination of these.
Bond coat A coating applied as an intermediary between the main or top coating and the substrate in order to improve the bond strength and/or to provide a corrosion or oxidation barrier.
Bond strength The strength of the adhesion between the coating and the substrate. A number of test methods are in use to measure the bond strength of coatings.
Boronising The diffusion of boron into the surface of a component (usually steel) by a high temperature (approx. 900 o C) gas or pack process. Produces hard phases within the surface (Typically 100Ã‚Âµm deep).
Back to top
Cadmium plating The electrolytic deposition of cadmium to provide galvanic corrosion protection. Restricted by environmental considerations.
Cadmium ion plating The deposition of cadmium by a vacuum process to provide galvanic corrosion protection.
Carbonitriding Similar to Carburising. Diffusion of carbon and nitrogen at about 900oC (by pack, gas, salt bath or plasma process) into low carbon steel, followed by quenching and tempering to produce martensitic case (typically 1mm thick).
Carburising (also called Case Hardening) Diffusion of carbon at about 900oC (by pack, gas, salt bath or plasma process) into low carbon steel, followed by quenching and tempering to produce martensitic case (typically 1mm thick).
Carrier gas Usually nitrogen or argon gas that carries powder into the thermal spray process. Casehardening See Carburising
Cathode Negatively charge electrode. Electrode of an electrolytic cell at which reduction is the principle reaction. (Electrons flow towards the cathode in the external circuit.)
Cathodic coating Coatings which become the cathode in an electrochemical cell with the substrate (anode). This type of coating protects the substrate from corrosion only by being a complete barrier. If the coating allows the environment to reach the substrate, accelerated corrosion of the substrate will occur.
Cathodic protection A technique to reduce the corrosion rate of a metal by making it the cathode of an electrochemical cell. Thermal spray zinc and aluminium coatings provide this protection to steel substrates, the coating being the anode and the steel being the cathode.
Cation A positively charged ion.
Cavitation The formation and rapid collapse within a liquid of cavities or bubbles that contain vapour or gas or both.
Cavitation Erosion A form of erosion causing material to be removed by the action of vapour bubbles in a very turbulent liquid.
Cermet powders A blended or composite powder of metal and ceramic constituents.
Chemical conversion coating A protective or decorative nonmetallic coating produced in situ by chemical reaction of a metal with a chosen environment. (It is often used to prepare the surface prior to the application of an organic coating.)
Chemical Vapour Deposition (CVD) The deposition of a coating by means of a chemical reaction in gases in a chamber producing components which deposit on and adhere to the substrate.
Chromating Chromate conversion is a process which completely degreases and removes all traces of the oxide film, replacing it by immersion with a chromate coating which can then be painted. It is used as a post-treatment for cadmium, zinc and aluminium coatings
Chromising High temperature (approx. 900 o C) pack or gaseous diffusion of chromium into the surface of a component to enhance high temperature corrosion and oxidation resistance.
Cladding The application of a thick (generally above 1mm) coating which melts or diffuses into the substrate. Processes include weld cladding and plasma transferred arc (PTA).
Coating The application of a layer of material onto the surface of a substrate.
Cold welding Cohesion between two surfaces of a metal, generally under the influence of externally applied pressure at room temperature.
Composite Mixture of two or more materials. Nearly all have a reinforcing material(wood, glass, etc.), called filler, and a natural or artificial resin, called matrix to achieve specific characteristics and required properties.
Composite Coating Mixture of two or more materials. Many thermal spray coatings could be considered as composites.
Composite Powder A powder in which each particle consists of two or more distinct materials joined together.( Not the same as a powder blend.)
Corrosion Chemical or electrochemical reaction between a material and it's environment which results in deterioration in the properties of the material.
Corrosion fatigue The process in which a metal fractures prematurely under conditions of simultaneous corrosion and repeated cyclic loading at lower stress levels or fewer cycles than would be required in the absence of the corrosive environment.
Corrosion potential The potential of a corroding surface in an electrolyte relative to a reference electrode measured under open circuit conditions.
Corrosive wear Wear in which chemical or electrochemical reaction with the environment is significant. Crevice corrosion Localized corrosion of a metal surface at, or immediately adjacent to, an area that is shielded from the full exposure to the environment because of close proximity between the metal and the surface of another material.
Crushed powder Powder formed from a solid which is then crushed to the appropriate size for spraying. Copper plating The electrolytic deposition of copper to provide either a corrosion barrier (often as an undercoat for hard chrome plate) or for reclamation of worn parts. CVD See Chemical Vapour Deposition
Back to top
Degreasing The removal of grease and oil from a surface. Degreasing by immersion in liquid organic solvents or by solvent vapours condensing on the parts to be cleaned.
Deposit corrosion Localized corrosion under or around a deposit or collection of material on a metal surface. (See also crevice corrosion.)
Detonation Gun A thermal spray process in which the coating material is heated and accelerated to the workpiece by a series of detonations or explosions from oxy-fuel gas mixtures.
Diamond-like Carbon A thin carbon-based coating applied by either PVD or PACVD. It has high hardness and low friction.
Diffusion Coating An alloy coating produced by applying heat to one or more coatings deposited on a basis metal.
Ductility The ability of a material to deform plastically without fracturing. Back to top
Electrochemical cell An electrochemical system consisting of an anode and a cathode in metallic contact and immersed in an electrolyte. (The anode and cathode may be different metals or dissimilar areas on the same metal surface.
Electroless Nickel The autocatalytic deposition of nickel/phosphorous and nickel/boron have many useful corrosion and tribo/corrosion applications. Unlike the electrolytic processes, they produce a deposit with completely uniform coverage. In the case of Ni P, deposits around 25 to 50 microns thick with a hardness of about 500Hv is obtained, but thermal ageing at temperatures around 400Ã‚Â°C can develop hardness values in excess of 1000Hv.
Electrolyte A conducting medium in which the flow of current is accompanied by movement of matter. A substance that is capable of forming a conducting liquid medium when dissolved or melted.
Electrolysis Production of chemical changes of the electrolyte by the passage of current through an electrochemical cell.
Electromotive Force Series (EMF Series) A list of elements arranged according to their standard electrode potentials, with "noble" metals such as gold being positive and "active" metals such as zinc being negative.
Elasticity The property of certain materials that enables them to return to their original dimensions after an applied stress.
Electroplating The electrodeposition of an adherent metallic coating upon an electrode for the purpose of securing a surface with properties or dimensions different from those of the substrate material. Embrittlement The severe loss of ductility or toughness or both, of a material, usually a metal or alloy. Erosion Removal of material from a surface due to mechanical interaction between that surface and a fluid, a multicomponent fluid, or impinging liquid or solid particles
Erosion-corrosion Associated action involving corrosion and erosion in the presence of a corrosive substance.
Etch A roughened surface produced by chemical, electrochemical or mechanical means. To dissolve unevenly a part of the surface of a material to highlight microstructure in metallography.
Exfoliation Corrosion that proceeds laterally from the sites of initiation along planes parallel to the surface, generally at grain boundaries or coating interfaces, forming corrosion products that force metal or coating away from the body of the material, giving rise to a layered appearance.
Exothermic reaction or material Certain materials undergo chemical reactions when thermally sprayed and produce extra heating. This can be useful in improving adhesion of the coating to the substrate. Back to top
Fatigue A cumulative effect causing a material to fail after repeated applications of stress none of which exceeds the ultimate tensile strength. The fatigue strength (or fatigue limits) is the stress that will cause failure after specified number cycles.
Fatigue wear Wear of a solid surface caused by fracture arising from material fatigue.
Fines The portion of a powder composed of particles which are smaller than the specified size
Flame hardening The localised surface heating of a medium carbon steel by an impinging gas flame so that the temperature is raised above 900 o C. The part is quenched (or self-quenches by virtue of the remaining cool bulk of the component) and tempered to produce a hard martensitic structure at the surface.
Flame spraying A thermal spraying process in which the particles are heated and accelerated in a flame (combustion flame, plasma flame). Old term for thermal spray process.
Filler A solid inert material added to a synthetic resin or rubber, either to change its physical properties or simply to dilute it for economy.
Fretting Small amplitude oscillatory motion, usually tangential, between two solid surfaces in contact. Fretting corrosion A form of fretting wear in which corrosion plays a significant role.
Fretting wear Wear arising as a result of fretting (see fretting).
Friction The reaction force resulting from surface interaction and adhesion during sliding. The friction Coefficient is defined as the friction force divided by the load.
Fused coatings A process in which the coating material is deposited by thermal spraying and then fused by post heat treatment. This can be done by flame, induction heating, furnace or by laser.
Fused and crushed powder Powder formed from a fused solid mass which is then crushed to the appropriate size for spraying. Back to top
Galling Damage to the surfaces of materials sliding in contact with each other, usually caused by the localised welding together of high spots. Common for materials like stainless steel, aluminium alloys and titanium.
Galvanic corrosion Accelerated corrosion of a metal because of an electrical contact with a more noble metal or nonmetallic conductor in a corrosive electrolyte.
Galvanic Series A list of metals and alloys arranged according to their relative corrosion potentials in a given environment.
Gas carburising See Carburising
Gas flow rate The flow rate of gas (e.g. litres per minute) through the spraying torch.
Gas nitriding see Nitriding
Gas nitrocarburising See Nitrocarburising
Galvanising A hot dip process for deposition of zinc for galvanic corrosion protection of steel.
Gold plating The electrolytic deposition of gold for decorative or electrical applications. Granular powder Particles having approximately equidimensional nonspherical shapes.
Grinding The removal of material by the use of fixed abrasives like grinding wheels or emery paper.
Grit blasting A pressurised stream of hard metal or oxide grit material used to clean and roughen surfaces prior to coating. Back to top
Hard Chromium Plating The electrolytic deposition of chromium to form a very hard (1000Hv), tough coating with good wear resistance. The structure is micro-cracked.
Hardfacing The application of a cladding or coating of material designed to resist wear.
Hardness test A test designed to assess the resistance to penetration from a load. The surface is indented under a defined load and the depth or area of penetration is measured.
Helium (He) Monatomic noble gas, Most inert element, atomic number 2. Used as a plasma gas in plasma spraying .
High Velocity Oxy-fuel Spraying (HVOF) A Thermal spray process. The spray powder particles are injected into a high velocity jet formed by the combustion of oxygen and fuel, heated and accelerated to the workpiece.
HIPPING The high temperature/high pressure consolidation of a powder metallurgy component or thermally sprayed coating. Density is greatly increased and metallurgical changes provide enhanced corrosion and wear properties.
Hot dip coating A metallic coating obtained by dipping the substrate metal into a molten metal.
HVOF See High Velocity Oxygen fuel spraying
Hydrogen (H 2 ) Diatomic gas, atomic number 1, The lightest element, very reactive and powerful reducing agent. Used as a secondary plasma gas in the plasma spraying process and as a fuel gas in combustion thermal spray processes ( CWS , CPS and HVOF )
Hydrogen embrittlement Hydrogen induced cracking or severe loss of ductility caused by the presence of hydrogen in the metal. Hydrogen absorption may occur during electroplating, pickling etc. ( The use of hydrogen as a secondary gas in plasma spraying does not appear to effect substrates and the majority of coatings, one exception being titanium coatings.)
Hydrophilic Tending to absorb water.
Hydrophobic Tending to repel water or lacking affinity for water Back to top
Impregnation A process of filling the pores of a coating with resin, wax or oil. (See sealer, vacuum impregnation)
Induction heating The heating of a electrically conductive material by an induction coil producing alternating magnetic fields which induce alternating electric currents to flow in the material and cause heating by resistance. Used in many heating process (induction fusing, induction plasma, induction hardening etc..) Induction hardening The localised surface heating of a medium carbon steel by an induction coil so that the temperature is raised above 900 o C. The part is quenched (or self-quenches by virtue of the remaining cool bulk of the component) and tempered to produce a hard martensitic structure at the surface.
Impingement A process resulting in a continuing succession of impacts between (liquid or solid) particles and a solid surface.
Impingement corrosion a form of erosion-corrosion generally associated with the impingement of a high velocity, flowing liquid containing air bubbles against a solid surface.
Interconnected porosity A network of pores in and extending to the surface of a coating.
Ion-Implantation A process in which a beam of positive ions is projected towards and into the surface. It is carried out in partial vacuum and the ions diffuse into the surface layer of the substrate. Typically this is carried out with nitrogen giving a nitrided effect.
Ion nitriding Also called plasma nitriding. A vacuum glow discharge technique of nitriding. See Nitriding. Ion plating A process in which positive ions produced in a glow discharge are attracted to the substrate which is connected as the cathode. The ions are typically made by evaporation.
Irregular powder Particles lacking symmetry.
Intergranular corrosion Preferential corrosion at or adjacent to the grain boundaries of a metal or alloy. Internal oxidation The formation of isolated particles of corrosion products beneath the surface of the metal or coating. (This occurs as a result of preferential oxidation of certain alloy constituents by inward diffusion of oxygen, nitrogen, sulphur, etc. Back to top
Lapping Rubbing two surfaces together, with or without abrasives, for the purpose obtaining extreme dimensional accuracy or superior surface finish.
Laser alloying The application of a powder to a surface followed by fusing and alloying into the surface via the heat from an impinging laser.
Laser glazing The melting and quenching of a surface to form a fine grained structure or 'glaze'.
Laser hardening The localised surface heating of a medium carbon steel by an incident laser so that the temperature is raised above 900 o C. The part is quenched (or self-quenches by virtue of the remaining cool bulk of the component) and tempered to produce a hard martensitic structure at the surface.
Liquid impingement erosion Progressive loss of material from a solid surface due to continue exposure to impacts by liquid drops or jets.
Localized corrosion Corrosion at discrete sites, for example, pitting, crevice corrosion, and stress corrosion cracking.
LPPS See 'Vacuum or Low Pressure Plasma Spraying.'
Lubricant Any substance interposed between two surfaces for the purpose of reducing the friction or wear between them. Back to top
Macrohardness The hardness of a coating as measured on a macroscopic scale, which shows the coatings bulk properties.
Magnetron sputtering See Sputtering. In this PVD process, the sputtering action is enhanced by intense magnetic fields.
Matrix The continuous phase of a material or coating in which separate particles of another constituent are embedded. (Like tungsten carbide particles in a cobalt matrix)
Micrograph A micrograph is produced when a section of the coating is taken, polished to show the particulate layers and then photographed through a microscope.
Minus sieve The portion of a powder sample which passes through a standard sieve of specified number e.g. -140 mesh +325 mesh. ( See plus sieve)
Mechanical bonding Usually represented by mechanical interlocking of the deposited particles with the rough heights on the substrate surface produced during grit blasting.
Metallurgical bonding Produced by diffusion or chemical bonding between the coating and substrate. Microhardness The hardness of a coating as measured on a microscopic scale. Can show the hardness of individual phases within the coating and avoid the effects of porosity.
Microinch One millionth of an inch, 0.000001".
Micrometer (Ã‚Âµm) One millionth of a metre, 0.001mm.
Microtrack A device for measuring powder particle size distributions.
Mil One thousandth of an inch, 0.001" (Common in USA) Back to top
Nickel plating The electrolytic deposition of nickel to form a corrosion barrier or to reclaim a worn part. Can also include hard ceramic particles to from a wear resistant composite coating.
Nitriding The diffusion of nitrogen into alloy steel to form hard nitrides in the surface layer (typically 250Ã‚Âµm). Performed at between 500 and 750 o C from a gas, salt bath or plasma glow discharge. Nitrocarburising The diffusion of nitrogen and carbon into alloy steel or mild steel to form hard nitrides in the surface layer (typically 250Ã‚Âµ). Performed at between 500 and 750 o C from a gas, salt bath or plasma glow discharge.
Nitrogen (N 2 ) Diatomic gas. Used as a primary and secondary gas in plasma spraying . Inert to most materials, with some exceptions like titanium.
Noble metal A metal that does not readily tend to furnish ions, and therefore does not dissolve readily, nor easily enter into such reactions as oxidation, etc. The opposite of base metal.
Nodular powder Irregular particles having Knotted, rounded, or similar shapes. Back to top
Oxidation Loss of electrons by a constituent of a chemical reaction. (Also refers to the corrosion of a metal that is exposed to an oxidising gas at elevated temperatures.)
Oxidising An environment or material which promotes oxidation
Oxygen (O 2 ) Gas used to support combustion of fuel gases in combustion thermal spray processes. Achieves much higher flame temperatures than using air. Back to top
Pack carburising See Carburising Painting The application of organic based layers (acrylics, etc.) for corrosion protection and decorative purposes.
Particle chemistry The elements contained within the particles of a spray powder.
Particle size The controlling lineal dimension of an individual particle as determined by analysis with sieves or other suitable means.
Particle size distribution The percentage by weight, or by number, of each fraction into which a powder sample has been classified with respect to sieve number or microns.
Passivation The process in metal corrosion by which metals become passive. (See passive)
Passivator A type of inhibitor which appreciably changes the potential of a metal to a more noble (positive) value.
Passive The state of a metal surface characterized by low corrosion rates in a potential region that is strongly oxidising for the metal.
Peening Blasting process using spherical shaped beads or shot for cleaning and/or modifying surface properties.
Permeability A property measured as a rate of passage of a liquid or gas through a coating
Plus sieve The portion of a powder sample retained on a sieve of specified number. (See minus sieve.) Physical Vapour Deposition A term covering all the vapour deposition processes including Ion plating, It does not include CVD as this is chemical not physical.
Phosphating A conversion treatment to produce a thin phosphate-based layer on a steel surface, providing improved corrosion protection and good surface for painting.
Photo-thermal NDT An NDT technique for spayed coatings. A repeated pulse of heat, from a laser source, flows through the coating and substrate. The thermal signature is detected and related to the input signal thereby indicating coating thickness.
Pitting--tribology A form of wear characterized by the presence of surface cavities the formation of which is attributed to processes such as fatigue, local adhesion, or cavitation.
Pitting--corrosion corrosion of a metal surface, cofined to a point or small area, that takes the form of cavities Plasma Carburising See Carburising
Plasma jet or plasma flame A jet of highly ionised gas usually produced from a plasma torch. An electric arc is struck between a cathode and anode and is then blown through a nozzle to form the flame or jet. Plasma Nitriding Also called Ion Nitriding. See Nitriding
Plasma Spraying A thermal spraying process in which the heat source is a plasma flame.
Plasma Transferred Arc (PTA) Similar to the plasma spray process in that powder is sprayed through a plasma, but instead of being heated via a neutral plasma (carrying no electric current) the arc is transfered to the substrate (made to be the anode). This is a hot process and produces coatings similar to fused or weld hardfacing coatings.
Plowing The formation of grooves by plastic deformation of the softer of two surfaces in relative motion. Polyester A condensation polymer formed by the interaction of polyhydric alcohols and polybasic acids. They are used in some coatings and the manufacture of glass-fibres products. See Alkyd resin.
Polymer Organic substance having large molecules consisting of repeated units. There are a number of natural polymers, such as polysaccharides synthetic polymer are extensively used in plastics.
Porosity The presence of pores or voids in a coating, usually expressed as a percentage by volume.
Powder coating A polymeric coating deposited via electrostatic attraction
Powder injection angle The angle from which the powder is injected into the plasma jet in plasma spraying. Pre-alloyed powder A powder composed of two or more elements which are alloyed in the powder manufacturing process and in which the particles are of the same nominal composition throughout.
Polishing The smoothing of a material surface by means of the action of abrasive particles attached usually to a fabric cloth. The final mechanical step in metallographic preparation.
Propane (C 3 H8 ) Aliphatic hydrocarbon gas used as a fuel gas in thermal spray processes.
Propylene (C 3 H6 ) Hydrocarbon gas used as a fuel gas in thermal spray processes. Higher flame temperature than hydrogen and propane.
Pull-out Pull-out occurs when particles are plucked from the coating during machining or grinding. Also occurs during metallographic preparation. It is sometimes confused with porosity.
PVD See Physical Vapour Deposition Back to top
Reducing Agent A substance that cases reduction, thereby itself becoming oxidised.
Reduction A reaction in which electrons are added to the reactant. More specifically, the addition of hydrogen or the abstraction of oxygen.
Resin A synthetic or naturally occurring polymer
RFI Shielding Thermal spray coatings of electrically conductive metals such as zinc, aluminium and copper are used on non-conducting composite casing materials to shield sensitive electronic devices from radio frequency electromagnetic interference.
Rhodium plating The electro-deposition of rhodium for oxidation resistance combined with surface hardness. Back to top
Sacrificial coating A coating that provides corrosion protection wherein the coating material corrodes in preference to the substrate,thereby protecting the latter from corrosion.
Salt Bath Carburising See Carburising
Salt Bath Nitriding See Nitriding
Salt Bath Nitrocarburising See Nitrocarburising
Scoring A severe form of wear characterized by the formation of extensive grooves and scratches in the direction of sliding.
Scratching The mechanical removal or displacement, or both, of material from a surface by the action of abrasive particles or protuberances sliding across the surfaces.
Sealant, Sealer A preparation of resin or wax type materials for sealing the porosity in coatings.
Sealing A process which, by absorption of a sealer into thermal spray coatings, seals porosity and increases resistance to corrosion of the underlying substrate material.
Self-bonding coatings A name given to thermal spray coatings that are capable of bonding to clean smooth surfaces. Bond and "one-step" coatings are normally in this group. These are paticularly important where grit blasting or surface roughening processes must be omitted.
Shrinkage A decrease in dimensions of a coating during processing.
Shrinkage stress The residual stress in a coating caused by shrinkage during processing.
Shot peening The bombardment of a component surface with steel or ceramic shot. Produces a residual compressive stress in the surface and improves fatigue and stress corrosion performance.
Sieve classification That portion of a powder sample which passes through a standard sieve of specified number and is retained by some finer sieve of specified number.
Shroud A gaseous and/or mechanical or physical barrier placed around the spraying process designed to reduce the ingress of air into the system and so reduce oxidation of the of the materials being sprayed.
Silver plating The electro-deposition of silver for electrical, decorative or anti-fretting properties.
Size analysis Analysis of the size of the particles being deposited by spraying processes.
Size distribution The distribution of sizes within a size analysis. The distribution may be normal or skewed in some way due to the powder manufacturing process.
Spalling The lifting or detachment of a coating from the substrate.
Spray chamber A chamber in which the spraying process is carried out. It may merely be an acoustic chamber for plasma spraying or a vacuum chamber for vacuum plasma spraying.
Spray dried powder Powder formed by the spray drying process.
Spray-fused coatings A process in which the coating material is deposited by flame spraying and then fused into the substrate by the addition of further heat. This can be applied by flame, induction heating or by laser. Sputtering This is a glow discharge process whereby bombardment of a cathode releases atoms from the surface which then deposit onto a nearby target surface to form a coating.
Steam tempering The production of a stable oxide on steel parts by treatment in steam at about 300 o C. Improves corrosion performance and reduces friction.
Strain A measure of the extent to which a body is deformed when it is subjected to a stress.
Stress The force per unit area on body that tends to cause it to deform. It is a measure of the internal forces in a body between particles of the material of which it consists as they resist separation, compression, or sliding.
Stress corrosion cracking A cracking process that requires the simultaneous action of a corrodent and sustained tensile stress.
Substrate The parent or base material to which the coating is applied.
Surface preparation Cleaning and roughening the surface to be sprayed, usually by grit blasting. This is to increase the adhesion of the coating to the substrate.
Sulphidation The reaction of a metal or alloy with a sulphur containing species to produce a sulphur compound that forms on or beneath the surface of the metal or alloy.
Surface topography The geometrical detail of a surface, relating particularly to microscopic variations in height.
Surfacing The application of a coating or cladding to a surface to impart a change in its surface behaviour.
Back to top
Tensile strength A measure of the resistance that a material offers to tensile stress. It is defined as the stress, expressed as the force per unit cross sectional area, required to break it.
Tensile stress Axial forces per unit area applied to a body that tend to extend it.
Thermal barrier coating A coating forming an insulating barrier to a heat source to protect the substrate. Thermochemically formed coatings A painted, dipped or sprayed chromium oxide based coating consolidated by repeated deposition and curing cycles (about 500 o C).
Thermal spraying A process in which coating material is heated and accelerated from a spray torch towards the workpiece. The deposited material forms a coating on the surface.
Thermography An NDE technique in which the coating is flash heated and then viewed with an infra red camera. "Hot spots" indicate areas of poor bonding or greater coating thickness.
Transferred arc In a plasma torch the plasma jet is emitted from the torch and the current flows from the internal cathode to the internal anode represented by the nozzle of the torch. When the jet is carried to another anode with it being electrically favourable to do so the current will then transfer to the second anode, usually the workpiece and the arc is said to be transferred.
Tribology The science and technology concerned with interacting surfaces in relative motion. Back to top
Wire spraying A thermal spray process whereby the supply for the coating material is fed into the gun in the form of a continuous wire.
Wear Loss of material from a surface by means of some mechanical action.
Welding - in tribology , the bonding between surfaces in direct contact, at any temperature.
Welding Process The joining of materials by the application of heat or friction. Usually involves the localized fusion of both contacting surfaces.
Zinc (Zn) Thermal spray coatings of zinc or zinc alloys (eg Zn/Al, Zn/Sn) provide galvanic corrosion protection.
Zinc Plating The electro-deposition of zinc or zinc alloys (eg Zn/Ni, Zn/Sn) to provide galvanic corrosion protection.
Source:Â Gordon England, Independent Mettallurgist & Consultant to the Thermal Spray Coating Industry
Â Â Â Â Â Â Â Â Â Â Â Â Â www.gordonengland.co.uk
Back to top